Technicolor - Thomson 8900NET Bedienungsanleitung Seite 58
- Seite / 72
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
58 8900NET Instruction Manual
Service
Cannot Connect to the Frame From a VTECS1 VideoFrame Control Panel
1. Check that the frame is powered and configured with a 8900NET
module on the network.
2. Check that the 8900NET module in the frame is loaded with software
version 2 or later.
Version 1 software does not support the control panel connection.
3. Check that the control panel has been properly configured with IP
Address, Gateway IP Address, and Subnet Mask. (Refer to the control
panel’s help feature or instruction manual.)
4. Check that the frame’s correct IP Address has been configured in the
control panel’s frame address.
5. Check that the control panel is physically connected to the network.
a. Check that the control panel is connected to a port on an Ethernet
hub.
b. Check if the L LED (L for link) on the back of the control panel is on.
If the LED indicates no link (off), try a different hub port connec-
tion.
If the LED still indicates no link, change the cable.
If the LED still indicates no link, contact VideoFrame.
6. Check that the frame is addressable by the control panel.
a. Check if the T LED (T for transmit) on the back of the control panel
flashes upon the attempt to connect to the frame.
If T does not flash, contact VideoFrame.
b. Check if the R LED (R for receive) on the back of the control panel
flashes upon the attempt to connect to the frame.
If R does not flash, there may be a problem in the network path
between the frame and the control panel.
7. Check that the frame is addressable on the network from a Web
browser, refer to the steps on page 54.
a. Attempt to connect to a different frame.
If successful the problem may be with the original frame or the path
between the control panel and the original frame.
b. Check from a workstation connected to the same Ethernet hub as
the control panel. If unsuccessful, there may be a problem with the
network path between the frame and this hub.
- 8900NET 1
- Contacting Grass Valley 2
- Contents 3
- Appendix 4
- About This Manual 5
- 6 8900NET Instruction Manual 6
- 8900NET Network Interface 7
- Remote Control Panel 8
- Basic Network Design 8
- 0612-04r1 9
- Configuration DIP switches 10
- Component side 10
- ETHERNET 11
- 0612 -09r1 12
- 8900CAB 13
- Ethernet Cable 14
- 10 BaseT 15
- Power Up 16
- Monitor Module Indicator LEDs 17
- 12345678 18
- NetConfig Application 19
- Good Networking Practices 19
- Web Browser Setup 22
- Web Browser Notes 23
- Addressing the Frame URL 23
- Using the 8900NET GUI 24
- 0612-12r1 25
- Frame Properties 26
- Legacy Module Support 27
- Frame Configuration Page 28
- 8900NET Module Interface 29
- SNMP Agent Installation 30
- SNMP Report Activation 33
- Locate Module 34
- Slot Identification 34
- Hardware Switch Controls 35
- Slot SNMP Trap Reports 35
- Rebooting the NET Module 36
- Updating Software 37
- 0612-24r1 38
- Next > 40
- Click on Next > 41
- 7. Start the FTPD 47
- Select Software Update 50
- Figure 35. Login Incorrect 51
- Update Processing Details 52
- Specifications 53
- Troubleshooting GUI Operation 54
- SETUP command? 55
- Functional Description 62
- Fan Speed Control and Monitor 64
- On-board Regulator 64
- Control and Monitoring Notes 67
- 8900–FLOAD–CBL Assembly 67
Verwandte Produkte und Handbücher für Gateways / Controller Technicolor - Thomson 8900NET
(88 Seiten)Weider WEBE2998 manuels
Manuels d'utilisation et guides de l'utilisateur pour Conditionnement physique, gymnastique et musculation Weider WEBE2998.
Nous fournissons des manuels en pdf 1 Weider WEBE2998 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Kommentare zu diesen Handbüchern